AMT71 Automotive Sensor Simulator And Tester

Measure the signals of automotive sensors
Allow simulation of most sensor and computer management components
Check basic ECU operation
Eliminate unnecessary replacement of non-defective sensors

Features

Measure the signals of automotive sensors  

-          The most complete hand held diagnostic tester for sensors, wiring, connectors and on-board computers, DC voltage, lambda, frequency and pulse signals can be measured

-          Digital display shows actual output of signals

-          Measures any voltage AC or DC, resistance or frequency output

Allows Simulation of most Sensor and computer management components

-          Simulating temperature sensors, throttle potentiometers, switches, air flow meters and lembda/oxygen sensors

-          Features AC voltage output to simulate vehicle speed sensors(vss), CAM, CRANK, and ignition reluctors

-          Simulates actual working condition of any sensor without having to remove it from the vehicle-A.B.S., Crank, Can,Coolant, Oxygen, MAP, MAF, MAT, VSS, etc

Checks basic ECU operation 

-          Controlling the signals being produced allows you to check ECU response and operation. This prevents miss-diagnosis where the fault may lie in the ECU itself or in the wiring between the component and the ECU.

-          Works independently or with any scan tool ever made

Can be used on any domestic or import vehicle  
Eliminates unnecessary replacement of non-defective sensors  
Can drive computer into "open or closed loop."  

Specifications

Simulate Signal

Range

Function

DC Voltage       

0-1V

Simulating lambda/oxygen sensors

0-5V

Simulating DC signal of sensors 

0-12V

Resistance

0-5K

Simulating temperature or resistance sensors

0-200K

Frequency Signal V/Duty/Hz

0-5v 10-90% 10-4KHz

Simulating frequency signal sensors 

0-12V 10-90% 10-4KHz

   

Test Function

Range

Basic Accuracy

DC Voltage

400mV,4v ,40v,400v,1000v

(0.5%+3d)

AC Voltage

400mV,4v ,40v,400v,750v

(0.8%+3d)

DC Current

40mA,400mA,10A

(1.2%+3d)

AC Current

40mA,400mA,10A

(1.5%+3d)

Resistance()

400,4K,40K,400K,4M,40M

(1.0%+3d)

Capacitance

40nF,400nF,4F,40F,100F

(5.0%+3d)

Frequency

10Hz-10MHz

(0.5%+3d)

Duty cycle

0.1%-99.9%

(2.0%+3d)

Diode test and Audible Continuity test

 

Test current:10.6mA

 

>60 Buzzer sounds