¡¡

Shore hardness tester / shore Durometer

¡¡

SR1510A SR1510B SR1510C SR1510D
SR1510DO SR1510E SR1510 O SR1510 OO

¡¡

SR1510 Series Shore Hardness Tester

Applications:

SR1510A: test hardness of soft rubber, elastomers, natural rubber products, Neoprene, resin, Polyester, soft PVC, leather, etc.

SR1510B: test hardness of middle hard rubber materials, typewriter rollers, etc..

SR1510C: test hardness of foam plastic and sponge and etc soft material.

SR1510D: test hardness of hard plastic and hard rubber, such as thermoplastic, hard resin, plastic floorboard, bowling.

SR1510DO: test hardness of plastics and middle hard up to hard rubber materials.

SR1510E: test hardness of foam plastic and sponge and soft material, etc.

SR1510O: test hardness of soft elastic materials, print rollers, middle firm textile fabrics, nylon, Orlon, Perlon, Rayon.

SR1510OO: test hardness of sponge and cellular rubber, foam rubber, silicone, gel-like materials.

¡¡

Model

SR1510A

SR1510B

SR1510C

SR1510D

SR1510DO

SR1510E

SR1510O

SR1510OO

Measurement Range

0-100HA

0-100HB

0-100HC

0-100HD

0-100HDO

0-100HE

0-100HO

0-100HOO

Test Scale

Shore hardness

Standard

DIN53505, ASTMD2240,ISO7619 JISK7215

Parameters

Hardness result , average value , maxes, value

Measurement Deviation

<1%H

Resolution

0.1

Communication Interface

USB or Bluetooth

Operating Conditions

0¡ãC to 40¡ãC

Power Supply

4x1.5V AAA (UM-4) battery

Switch

Auto switch off

Battery Indicator

Low battery indicator

Dimensions

162x65x38mm

Weight

173g(no probe)

Standard Delivery

Instrument, Test block , English manual and carrying case

Optional Accessories

USB Cable & software, Bluetooth data output
Model Informations:
  Model
  Indenter
  Tested Materials
  Hardness Value
  A
  0.79 Truncated (Frustum) Cone
  Soft Rubber, Elastomers, Natural Rubber Products, Neoprene, Resin, Polyester, Soft PVC,Lleather, etc.
  20 ~ 90 A
  B
  R 0.1 Cone
  Middle Hard Rubber Materials, Typewriter Rollers, etc.
  Above 90 A,  Below 20 D
  C
  0.79 Truncated (Frustum) Cone
  Plastics and Middle Hard Rubber Materials
  Above 90 B, Below 20 D
  D
  R 0.1 Cone
  Fibre Plastics, Hard Rubber, Hard Plastic Materials, Plexiglas,Stiff Thermo Plastics, Formica, Print Roller, Vinyl-plate, Cellulose Acetate, etc.
  Above 90 A
  DO
  R 1.2 Spherical Radius
  Plastics and Middle Hard up to Hard Rubber Materials
  Above 90 C, Below 20 D
  O
  R 1.2 Spherical Radius
  Soft Elastic Materials, Print Rollers, Middle Firm Textile Fabrics, Nylon, Orlon, Perlon, Rayon
  Below 20 DO
  OO
  R 1.2 Spherical Radius
  Sponge- and Cellular Rubber, Foam Rubber, Silicone, Gel-like Materials
  Below 20 O
  E
  R 2.5 Spherical Radius
  Hard Sponge, EVA
   Above 90 DO, Below 20 D

¡¡

¡¡

¡¡

¡¡

Applications:

Shore Hardness Tester Measurement Stand, can be extended for 100 mm.

Test Stand for SR1510 series

Features:

The Shore Durometer Test Stand is R&D for our shore durometer SR1510 series which can make test more stable and accurate. By acting on weight to cause measuring force, let tip of durometer press to test material to an accurate value Shore Durmeter test stand is applied for A Shore Durometer , B Shore Durometer , C Shore Durometer , D Shore Durometer, DO Shore Durometer, E Shore Durometer, O Shore Durometer, OO Shore Durometer.

¡¡

Operation procedure:

Fix Shore durometer on the test stand through installation pole.
Put hardness block in accessory on glass stage, pressing operating handle under weight of poies to make durometer tip into hole of the block till press foot of durometer touching block completely.At this time,the hardness value on dial should be within ¡À1 of signed value on the block. If the value is not ¡À1, please adjust the adjusting nut under glass stage to make value turn to 100¡À1. If the durometer is without hardness block, pressing operating handle under weight of poies to make durometer tip to glass stage, and touching completely. At this time, the hardness value on dial should be within 100 ¡À1, if it is not, please adjust the adjusting nut under glass stage to make value turn to 100 ¡À 1.


Put the test material on the glass stage, drive operation handle under weight of designation weight. When durometer touches test material completely , read the value showed on dial at regular time . Reading value time of thermoplastic rubber is 15 seconds , vulcanized rubber of others unknown rubber is 3 seconds .


Shore C model (Micropore Material Durometer) is within 1 second to read the value after durometer touching the material completely. If adopting other test time, it should be pointed out in test report.

¡¡

* Notice: The test stand is only applied for our shore durometer. When installing different mode of durometer, please adjust quality of weight first according to requirements.
(1) Under environment without shock, the max pressing speed of test could not above 3.2mm/s.
(2) The requirement and adjustment of the sample are based on the corresponding standard of the sample.
¡¡ ¡¡

SR1510F Shore Hardness Tester

Durometer Type F is an exclusive design for testing sponge and soft cellular materials. The large diameter presser foot and cylindrical indentor configuration allow measurement by direct application to the test specimen.

Specifications

Display:4 digits, 10 mm LCD

Range:0~100

Resolution:  0.1

Presser foot: 80mm diameter

Indenter: Extension 2.54mm

                   25.2mm Cylinder

Spring force: 455gf

Measurement deviation: = ?

Power supply: 4x1.5v AA (UM-3) battery

Operating condition: Temp. 0~50C

                                 Humidity <80%      

Size:162x65x28mm (6.4x2.6x1.1inch)

Weight:about  490g / 1.1lb(not including batteries)

PC interface: RS232C interface

Power off :  2 modes

Manual off at any time by depressing the power key till OFF shows on the

display or Auto power off after 2 minutes from last key operation .

Accessories:
Carrying case 1 pc Operation manual 1 pc.
Optional accessories: able RS-232C & software OR cable USB & software

¡¡

¡¡

¡¡

¡¡

SR1510MF Memory Foam Hardness Tester

Features:

* Specially for hardness testing of MEMORY FOAM.
* It meets standards of DIN 53505, ISO 868, ISO 7619, ASTMD 2240, JISK7215.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use ¡°USB data output¡± and ¡°RS-232 data output¡± to connect with PC.
* Provide ¡°Bluetooth ™ data output¡± choice.

Specifications:

Parameters Displayed

Hardness Result, Average Value, Max. Value

Measurement Range

0 ~ 100 HMF

Measurement Deviation

<1% HMF

Resolution

0.1 HMF

Spring Force

455 gf

Sensor Head Diameter

25mm

Sensor Foot Diameter

80mm

Auto Switch Off

Battery Indicator

Low Battery Indicator

Operating Conditions

Temperature: 0~40¡ãC

Humidity: 10~90 %RH

Power Supply

4 * 1.5 V AAA Size (UM-4) Battery

Dimensions

162 * 80 * 80 mm (6.4 * 3.1 * 3.1 inch)

Weight

250g (Not Including Batteries)

Applications:

Memory Foam Hardness Tester SR1510MF, special for memory foam hardness measurement. (memory foam is also known as slow rebound sponge, space zero

pressure, space cotton, TEMPUR material, low rebound sponge material, viscoelastic, used in high velocity of aerospace, aviation, equipment, high-end consumer goods.)

Standard Accessories:
1. Main Unit
2. Carrying Case
3. Operation Manual
Optional Accessories:
1. USB data cable with software
2. Bluetooth data out put with software

¡¡

¡¡

Shore Durometer, Shore Hardness Tester, Shore Hardness Meter

SHORE A Durometer
Function:
SHORE A - widely used to test common rubber, complex rubber, soft rubber,elastomers, leather, wax and so on. It is available in DIN 53505, ASTM D2240, ISO/R868, JIS R7215.Executive standart - GB/T531-99,GB2411-80, HG/T2489-93, JJG304-2003.
Specification:
-High resolution;
-With facility, easy to operate;
-Use by handy or by test stand(HLX-AC);
-Test range: 0-100 HA;
-Available test range: 10-90 HA ;
-Dimension: 115*60*25(mm);
-Stroke: 2.5 mm;
-Tip dimension: ¦µ0.79mm;
-Net weight: 0.5kgs. 		SHORE C Durometer
Function:
SHORE C Durometer is widely used in testing of various foam, sponge, microporous material and so on. It is available in HG/T2489-93.
Specification:
-High resolution;
-With facility, easy to operate;
-Use by handy or by test stand(HLX-AC);
-Test range: 0-100 HW;
-Available test range: 10-90 HW ;
-Dimension: 115*60*25(mm);
-Stroke: 2.5 mm;
-Tip dimension: SR2.5mm;
Net weight: 0.5Kgs.
¡¡ ¡¡

SHORE D Durometer
Function:
SHORE D - widely used to test hard rubber, hard colophony, grass, plastic,print board, fibre and so on. It is available in DIN 53505, ASTM D2240,ISO/R868, JIS R7215.executive standart - GB/T531-99, GB2411-80,HG/T2489-93, JJG304-2003.
Specification:
-High resolution;
-With facility, easy to operate;
-Use by handy or by test stand(HLX-D);
-Test range: 0-100 HD;
-Available test range: 10-90 HD ;
-Dimension: 115*60*25(mm);
-Stroke: 2.5 mm;
-Tip dimension: SR0.1mm;
-Net weight: 0.5Kgs.

SHORE A (Peak hold) Durometer
Function:
SHORE A - widely used to test common rubber, complex rubber, soft rubber,elastomers, leather, wax and so on. It is available in DIN 53505, ASTM D2240, ISO/R868, JIS R7215.Executive standart - GB/T531-99,GB2411-80, HG/T2489-93, JJG304-2003.
Specification:
-High resolution;
-With facility, easy to operate;
-Use by handy or by test stand(HLX-AC);
-Test range: 0-100 HA;
-Available test range: 10-90 HA ;
-Dimension: 115*60*25(mm);
-Stroke: 2.5 mm;
-Tip dimension: ¦µ0.79mm;
-Net weight: 0.5kgs.

Peak hold: double pins, one to hold the peak testing value.
¡¡ ¡¡

SHORE C (Peak hold) Durometer
Function:
SHORE C Durometer is widely used in testing of various foam, sponge, microporous material and so on. It is available in HG/T2489-93.
Specification:
-High resolution;
-With facility, easy to operate;
-Use by handy or by test stand(HLX-AC);
-Test range: 0-100 HW;
-Available test range: 10-90 HW ;
-Dimension: 115*60*25(mm);
-Stroke: 2.5 mm;
-Tip dimension: SR2.5mm;
-Net weight: 0.5Kgs.

Peak hold: double pins, one to hold the peak testing value.

SHORE D (Peak hold) Durometer
Function:
SHORE D - widely used to test hard rubber, hard colophony, grass, plastic,print board, fibre and so on. It is available in DIN 53505, ASTM D2240,ISO/R868, JIS R7215.executive standart - GB/T531-99, GB2411-80, HG/T2489-93, JJG304-2003.
Specification:
-High resolution;
-With facility, easy to operate;
-Use by handy or by test stand(HLX-D);
-Test range: 0-100 HD;
-Available test range: 10-90 HD ;
-Dimension: 115*60*25(mm);
-Stroke: 2.5 mm;
-Tip dimension: SR0.1mm;
-Net weight: 0.5Kgs.

Peak hold: double pins, one to hold the peak testing value.
¡¡ ¡¡

SHORE O (Peak hold) Durometer

Function:  
SHORE O Durometer is widely used in testing of various foam, sponge, microporous material and so on. It is available in HG/T2489-93.
Specification:  
 High resolution;   
 With facility, easy to operate; 
 Use by handy or by test stand(HLX-AC); 
 Dimension: 115*60*25(mm); 
 Stroke: 2.5 mm; 
 Tip dimension: SR2.5mm; 
 Net weight: 0.5Kgs

¡¡
¡¡ ¡¡

PIN type for SHORE A, C, D durometer

test block for SHORE A, C, D durometer
¡¡ ¡¡

HLX-AC Test Stand
Function:
HLX-AC Durometer stand is R & D for SHORE A and SHORE C durometer. It will get more accurate result when fixing the durometer on the HLX-AC Durometer stand. Table platform in metal.
Specification:
-Match to SHORE A and C durometer;
-Construction include operating handle;
-Manual operation, easy and stable to operate;
-Dimension: 100*212*250(mm);
-Gross weight: 4 Kgs.		 HLX-D Test Stand
Function:
HLX-D Durometer stand is R & D for SHORE D durometer. It will get more accurate result when fixing the durometer on the HLX-D Durometer stand. Table platform in metal.
Specification:
-Match to SHORE D series durometer;
-Construction include operating handle;
-Manual operation, easy and stable to operate;
-Dimension: 100*212*250(mm);
-Gross weight: 9kg.
¡¡ ¡¡

Sponge Hardness Tester

SHORE F Durometer

In order to measure the hardness of foam, we special tailor-Made the F type sponge durometer to facilitate our customers. It is suitable for the determination of soft foam, polyurethane foam rubber products'hardness. And itwill be different with the other hardness tester In the aspects of using. When using, the presser foot directly contact to the sample, and see it sown weight as force measuremen tload.
Main parameters:
Scope of pressure needle route: 0~2.5millimeters.
The scale value: 0-100 degrees.
The force of pressure needle end: 550mN~4300mN(56~438.5g).
Second, the method of using:
Held the middle of the instrument, located the hardness tester gently on the plane Specimens which is bigger than presser foot(orspecimen). Reading out the value in 1 second when durometers'presser foot contact with the samples moothly. And the tick of pointers is the hardness value of sample (specimen). In order to improve the
Accuracy of measurement, you should putthe sample on a flat plate glass or plate.
Each measuring point should be measured only on
Forth, Attention:
1 When the durometer presser foot is in the free state, it points "0". The pressure
Needle end and the pressure foot flat is in close contact with the glass surface, the
Indication should be "100" If the Durometers' pointer can notshow "0' and "100"
Whenchecking, adjustitto"0'and"100
2, The sample and adjustments
The specimen thicknesss houldbe in 25mm to 30mm, when insufficient thickness Of 25mm, you can stack 2 pieces. But you need to ensure the flat surface smooth, The whole thicknesss tills hould conform to the sample thickness. The sample size should satisfy thel ength and the width are larger than100mm, The distance between the measuring point and sample edge is not less than 40mm, All measuring point are less than between 25mm, each sample pointsi s not less Than five points.
Take out the skin of both sides of the specimen, the thickness should be uniform, smooth surface, micro-hole distribution uniformity, no mechanical damage and impurities. SampletestconditionsaccordingtoGB/T2941-91provisions.
3, Afterusingthehardnesstester, putitininstrumentbox, putindryplacetoprevent Moisture.

¡¡

¡¡

Digital Shore Durometers

 

FEATURES
Large LCD display for easy reading. With data output. On/off switch. Zero setting at any position. Holding measured display values. Battery: 1.5V battery

This apparatus has three models as Type A and Type D.

Type A are applicable to the testing of low and medium hardness, soft rubber, elastomers, natural rubber products, Neoprene, resin, Polyester, soft PVC, leather, etc.

Type D are applicable to the testing of high-hardness materials, hard plastic and hard rubber, such as thermoplastic, hard resin, plastic floorboard, bowling.

¡¡

Type

Order Code

Indentor shape

Range 

Resolution

TypeA

SR5610A

Flat cone point (0.79 mm) 35º Included Angle

0-100HA

 0.5HA

TypeD

SR5610D

Sharp cone point (SR0.1mm) 30º Included Angle

0-100HD

 0.5HD

¡¡

FEATURES

Shore hardness tester is an apparatus to measure vulcanized rubber and plastic products.
This apparatus has three models as Type A, Type C and Type D.

Type A are applicable to the testing of low and medium hardness, soft rubber, elastomers, natural rubber products, Neoprene, resin, Polyester, soft PVC, leather, etc.

Type C is applicable to the testing of Foam, Sponge, microporous material which is used to make shoes, with compression rate 50 percent, stress 0.049 MPa or above, and this kind of material is made of rubber plastic and has blister in plastic.

Type D are applicable to the testing of high-hardness materials, hard plastic and hard rubber, such as thermoplastic, hard resin, plastic floorboard, bowling.

This hardness gauge conforms to the regulations of GB/T531, GB2411, HG/T2489, JB6148.

SPECIFICATION:

1:Measuring range: 0-100¡ã
2:Measuring error: Within 20-90¡ã, the error is <=¡À1¡ã
3:Resolution: 0.5¡ã
5:Pressure Needle Range: 0 -- 2.5mm

Type

Order Code

End pressure of Pressure Head

Range 

Resolution

TypeA

SR5611A

0.55N -- 8.05N

0-100HA

 0.5HA

TypeC

SR5611C

0.55N -- 8.05N

0-100HC

 0.5HC

TypeD

SR5611D

0 -- 44.50N

0-100HD

 0.5HD

¡¡

For fruit hardness tester, please click here: Fruit penetrometer

¡¡

 ( If you need user manual or E-catalogue for above meters, please ask for at: xiushunjie@163.com )