Water Leakage Alarm

The mainly function of water leakage alarm is that to prevent water leaking and the loss of water resources; and it is useful for users time to turn off the main water source and call the plumber. When the humidity reaches designated threshold value, the metal probe transfers the detected signal to internal circuit, which generates the micro current. The micro current will generate the alarm signal after it has been amplified; therefore the purpose of the alarm is achieved.

Model: XHST-LS
Name: XHST-LS Water Leak alarm

　

Specifications:

- power options: 12VDC-220VAC
 - is too static current: ≤ 15MA
 - Alarm current: ≤ 150MA
 - the alarm volume: ≥ 90dB @ 10 ft. (3 m)
 - the working temperature: 0 - 60 ºC
 - response and recovery time: ≤ 5S

- Alarm volume: > 90dB
- Adopts MPU control
- Automatic reset
- High stable sensor
- Automatic error detecting function
- Interconnection: By wired: NO or NC
- By wireless: 315MHz/433MHz (2262 or 1527)
- "+,-": 9V power connection
- "NO": Normal Open
- "NC": Normal Close
- "--": COMM
When the water container is overflowing, the detector detecting the water, and the alarm will warn.
This product applicable to high building, central air conditioning, basement, tank, computer room, boiler, water towers, cellar, pool, solar, fishpond, water dispenser, water container, wet pan, ceiling, floor and so on, all storage water equipment and where will leaking water places.

Package:

1. Size: 115mm*70mm*40mm

2. Weight:228g/pcs

3. Package size:58.5cm*28.5cm*53.3cm

4. Quantity/Box:100pcs

Model: XHST-LS/01
Name: XHST-LS Water Leak alarm

Description:
- Power supply: 110VAC ~ 240VAC, 12VDC ~24VDC
- Static current: ≤15MA*Alarm current: ≤200MA
- Operating temperature: 0 - 60 ºC;
- Respond time: ≤5S
- Alarm volume: > 90dB
- Adopts MPU control
- Automatic reset
- High stable sensor
- Automatic error detecting function
- Interconnection: By wired: NO or NC
- By wireless: 315MHz/433MHz (2262 or 1527)
- "+,-": 9-12V power connection
- "NO": Normal Open
- "NC": Normal Close
- "--": COMM
When the water container is overflowing, the detector detecting the water, and the alarm will warn.
This product applicable to high building, central air conditioning, basement, tank, computer room, boiler, water towers, cellar, pool, solar, fishpond, water dispenser, water container, wet pan, ceiling, floor and so on, all storage water equipment and where will leaking water places.
Package:
Size:115mm*70mm*40mm
Weight: 300g/pc
Package size: 58.5cm*28.5cm*53.3cm
Quantity/Box: 100pcs
CTN Weight (kg): 32.5kg
QTY/20`FT: 35200pcs

Model: XHST-LS/02
Name: XHST-LS/02 Water leaking alarm  (with shut off valve)

Description:
- Sensitive - a small amount of moisture will usually trigger the unit
- Completely electronic - no moving parts to fail or wear out
- Usually detects dampness before water damage can usually occur
- Uses a standard 9 volt alkaline battery (not included)
- When the battery is low it should "chirp"
- An alkaline battery could last up to 2 years
- No current draw on batteries unless alarming
- No wires to hook up, just set in place
- 4 sensors are stainless steel
- Sensor feet penetrate carpet unlike other alarms
- Constructed of injection molded ABS plastic
- No installation - just set it anywhere
- Size:76.2mm*76.2mm

Package:

100PCS/CTN, CTN SIZE: 57.5*27.5*55 CM, G.W: 31KGS